Raymarine forum / Raymarine Forums / Autopilots v / S2/SHS Problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
S2/SHS Problem
07-27-16, 02:35 PM
Post: #16
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: S2/SHS Problem
danderer,

The SeaTalk port or an E-Series Classic MFD provides very limited power output. Should the SeaTalk bus feature any devices other than a GPS sensor having a SeaTalkng communications interface, then it would not be recommended that the MFD's SeaTalk port supply power to the SeaTalk bus. In the case of the latter, it would be recommended that the SeaTalk bus be powered from a switched 12VDC power circuit.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
S2/SHS Problem - danderer - 06-19-16, 06:04 PM
RE: S2/SHS Problem - danderer - 06-21-16, 03:02 PM
RE: S2/SHS Problem - danderer - 06-22-16, 12:40 PM
RE: S2/SHS Problem - danderer - 06-22-16, 01:08 PM
RE: S2/SHS Problem - danderer - 07-02-16, 02:07 PM
RE: S2/SHS Problem - danderer - 07-27-16, 11:22 AM
RE: S2/SHS Problem - danderer - 07-27-16, 01:14 PM
RE: S2/SHS Problem - danderer - 07-27-16, 01:53 PM
RE: S2/SHS Problem - Chuck - Raymarine - Moderator - 07-27-16 02:35 PM
RE: S2/SHS Problem - danderer - 07-27-16, 02:45 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication