European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
DSM25 Status LED
|
|
07-27-16, 02:49 PM
(This post was last modified: 07-27-16 02:49 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: DSM25 Status LED
Welcome to the Raymarine Forum campion_explorer,
When a DSM25 is properly communicating with an A60/A65 Chartplotter/Fishfinder Display, its status LED will flash green as 1 second intervals. After 30 seconds of no network activity (i.e. no communications with the interfaced A60/A65 Chartplotter/Fishfinder Display), the DSM25 enters Standby mode: No sonar pings are emitted and no warnings are output on the LED. Instead, the LED blinks green once every 10 seconds. When the problem was observed was the vessel located in the water and was the depth of the water below the transducer at least 3 feet? |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
DSM25 Status LED - campion_explorer - 07-26-16, 06:20 PM
RE: DSM25 Status LED - Chuck - Raymarine - Moderator - 07-27-16 02:49 PM
RE: DSM25 Status LED - campion_explorer - 07-28-16, 08:14 AM
RE: DSM25 Status LED - campion_explorer - 07-28-16, 08:23 AM
RE: DSM25 Status LED - Chuck - Raymarine - Moderator - 07-28-16, 08:35 AM
|
User(s) browsing this thread: 1 Guest(s)