Raymarine forum / Raymarine Forums / Fishfinders v / DSM25 Status LED

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSM25 Status LED
07-28-16, 08:14 AM
Post: #3
campion_explorer Offline
Junior Member
**
 		Posts: 3
Joined: Jul 2016
Reputation: 0
RE: DSM25 Status LED
(07-27-16 02:49 PM)Chuck - Raymarine - Moderator Wrote:  Welcome to the Raymarine Forum campion_explorer,

When a DSM25 is properly communicating with an A60/A65 Chartplotter/Fishfinder Display, its status LED will flash green as 1 second intervals. After 30 seconds of no network activity (i.e. no communications with the interfaced A60/A65 Chartplotter/Fishfinder Display), the DSM25 enters Standby mode: No sonar pings
are emitted and no warnings are output on the LED. Instead, the LED blinks green once every 10 seconds.

When the problem was observed was the vessel located in the water and was the depth of the water below the transducer at least 3 feet?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DSM25 Status LED - campion_explorer - 07-26-16, 06:20 PM
RE: DSM25 Status LED - campion_explorer - 07-28-16 08:14 AM
RE: DSM25 Status LED - campion_explorer - 07-28-16, 08:23 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication