Raymarine forum / Raymarine Forums / Instruments v / DST800 with iTC-5 and e7D no speed

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DST800 with iTC-5 and e7D no speed
08-02-16, 01:30 PM
Post: #2
Mark - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 107
Joined: Feb 2016
Reputation: 1
RE: DST800 with iTC-5 and e7D no speed
Hello antyukhin,
What is the software version you are running on the e7D?

From the home screen, setup--->maintenance--->diagnostics--->select device
If you are not running the latest version of V17.45 I would upgrade first and then try setting the data source.
If you are running the latest software, try selecting the data source for speed.
From the home screen, system settings--->data sources--->speed--->select "ITC-5"
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: DST800 with iTC-5 and e7D no speed - Mark - Raymarine - Moderator - 08-02-16 01:30 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication