The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / Autohelm to seatalk ng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autohelm to seatalk ng
08-02-16, 03:12 PM
Post: #1
Lazybones Offline
Member
***
 		Posts: 70
Joined: Jul 2016
Reputation: 0
Autohelm to seatalk ng
Hello:

We are installing a new e165 MFD, quantum chirp radar, thermal imaging, Sirius weather...

We have a perfectly working (1990) Autohelm ST50 instruments, wind, speed, depth and Multi.

1. Can we use existing transducers for speed, wind and depth? If so, what is needed to connect them to the seatalk NG network?

2. Can we use the existing ST50 instruments to display readouts of the wind, speed, depth and to send the information to the seatalk NG network, or the reverse, for the MFD to send the data to the instrument displays via a seatalk to seatalk ng converter?

3. We have an autopilot SG3 (2004) course computer with an ST6001 control head. Can we interface the autopilot or the entire system including wind, depth and speed to the MFD?

Thanks,

Jeff
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Autohelm to seatalk ng - Lazybones - 08-02-16 03:12 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication