The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] EV-1 mounting

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] EV-1 mounting
08-07-16, 04:14 PM (This post was last modified: 04-06-18 10:18 AM by Chuck - Raymarine - Moderator.)
Post: #1
crosscr Offline
Junior Member
**
 		Posts: 3
Joined: May 2016
Reputation: 0
[CA] EV-1 mounting
I am starting the installation of an Evolution Autopilot on my boat and would like some advice on a mounting location for the EV-1. The boat is a Sea Ray 340 Sundancer. I am thinking about mounting the EV-1 on the underside of the radar arch, directly in the center. This location seems like an ideal location away from any potential interference. I do plan to add a Raymarine radar later this year and it will mount on top of the arch on a pedestal directly above the EV-1. Do you think a radar will cause interference problems for the EV-1. The radar will be a Q24C, RD418HD or RD418D. Thanks for any advice
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] EV-1 mounting - crosscr - 08-07-16 04:14 PM
RE: [CA] EV-1 mounting - madifonzo78 - 04-06-18, 10:06 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication