The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Marine Weather / Satellite Radio v / SR150 No Connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SR150 No Connection
08-08-16, 07:28 AM
Post: #1
twenger Offline
Junior Member
**
 		Posts: 4
Joined: Jun 2016
Reputation: 0
SR150 No Connection
I recently added an SR150 weather receiver to my Seatalk network. I have an E120 classic display. It was working and now all the sudden is showing NO CONNECTION on the display. All the LED's on the SR150 are displaying properly according to manual. And the unit is getting data from the antenna(strobing network LED). Should I send the unit to Raymarine to be checked out?

On a separate note, I have a neworked additional display in the cabin of my boat that does not support the SR150 and causes it to malfunction. I dont need weather on that display. Is there a workaround other than the expense of replacing the display?


Tim
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
SR150 No Connection - twenger - 08-08-16 07:28 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication