DST800 with iTC-5 and e7D no speed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

DST800 with iTC-5 and e7D no speed

08-08-16, 05:44 PM

Post: #6

antyukhin Offline

Junior Member

Posts: 8
Joined: Jul 2016
Reputation: 0

RE: DST800 with iTC-5 and e7D no speed

After disconecting green cable from speed/temp display shows 0.0kts.
Temperature I'm comparing to my neighbor boat data.
Dts800 is the only data source in my setup.
DST800 A22154
35-002-4-01
18-375-297 rev 01

« Next Oldest | Next Newest »

Messages In This Thread

DST800 with iTC-5 and e7D no speed - antyukhin - 08-02-16, 01:01 PM

RE: DST800 with iTC-5 and e7D no speed - Mark - Raymarine - Moderator - 08-02-16, 01:30 PM

RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-02-16, 03:42 PM

RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-03-16, 01:43 PM

RE: DST800 with iTC-5 and e7D no speed - Mark - Raymarine - Moderator - 08-04-16, 02:21 PM

RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-08-16 05:44 PM

RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-08-16, 07:09 PM

RE: DST800 with iTC-5 and e7D no speed - Chuck - Raymarine - Moderator - 08-09-16, 08:22 AM

RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-09-16, 09:08 AM

RE: DST800 with iTC-5 and e7D no speed - Chuck - Raymarine - Moderator - 08-09-16, 10:18 AM

RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-09-16, 11:35 AM

RE: DST800 with iTC-5 and e7D no speed - Chuck - Raymarine - Moderator - 08-09-16, 11:49 AM

RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-15-16, 04:26 PM

RE: DST800 with iTC-5 and e7D no speed - Chuck - Raymarine - Moderator - 08-16-16, 08:57 AM

RE: DST800 with iTC-5 and e7D no speed - george123 - 08-25-16, 08:52 AM

RE: DST800 with iTC-5 and e7D no speed - Chuck - Raymarine - Moderator - 08-25-16, 09:15 AM

User(s) browsing this thread: 2 Guest(s)