Raymarine forum / Raymarine Forums / Instruments v / I70s Water temp

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
I70s Water temp
08-12-16, 10:05 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: I70s Water temp
Welcome to the Raymarine Forum David,

Is the only source of water temperature data within the system coming from the Mercury side of the engine gateway? If so, then it would be recommended that a NMEA 2000 CAN bus analyzer (ex. Actisense NGT-1-USB w/Actisense NMEA Reader software) be interfaced to the SeaTalkng backbone to determine whether 1) more than one instance of PGN 130310 Environment Parameters is present on the backbone, and if not 2) determine whether the water temperature reported within PGN 130310 is stable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
I70s Water temp - [email protected] - 08-07-16, 06:16 PM
RE: I70s Water temp - Chuck - Raymarine - Moderator - 08-12-16 10:05 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication