Quantum User Manual?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Jack,

As accessory sensor devices (ex. radomes, open array pedestals, CP100/200/370/470/570, SR150, etc.) do not have control or user interfaces directly on the sensor itself, Raymarine only provides installation guides for these products. The user interface for such items is the MFD to which the accessory sensor device has been interfaced. Accordingly, the latest version of operations guide for the MFD will include operational information for the sensor device. In this case, Quantum radome setup and operation is included within Chapter 16 Radar Operation of the LightHouse II MFDs Release 17 Operations Guide. Other than setting up communications with the Quantum radome, Raymarine has designed its controls to be common to Raymarines other compatible radar transducers. Features which are unique to the HD and SuperHD radar transducers (ex. Dual Range, 48 RPM, Bird Mode, etc.) are identified as such within the corresponding sections of the Radar Operation chapter.

As with other Raymarine products, the latest version of the LightHouse II MFDs Operations Guide may be downloaded from Raymarine's Manuals and Documents web page. The web page additionally feature a link to permit customers to purchase a hard copies of the latest versions of Raymarine's product documents. Finally, the LightHouse II MFDs Operations Guide (corresponding to the version of LightHouse II software presently installed within the MFD's memory) is installed with the MFD's memory each time that the MFD's software is updated, permitting the Operations Guide to be viewed via the MFD.

As Quantum radomes are designed to CHIRP, interference from other radar transducers is unlikely.