The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / Temperature Readout ST-60 Speed

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Temperature Readout ST-60 Speed
03-07-16, 09:34 AM
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2016
Reputation: 0
Temperature Readout ST-60 Speed
About mid summer last year, I started to get erroneous temperature readouts from the ST-60 Speed Log. All other functions work fine. There is a temperature presented, usually 2 degrees centigrade, but it varies a bit. Actual water temp in the high teens at least.

Is there a reset, or reboot to try. I'm assuming wiring is ok, as the speed information from impeller is transmitted fine.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Temperature Readout ST-60 Speed - [email protected] - 03-07-16 09:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication