Raymarine forum / Raymarine Forums / Product Selection Assistance v / Dual Station Depth Speed Requirement

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dual Station Depth Speed Requirement
08-24-16, 02:53 PM (This post was last modified: 08-24-16 02:53 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Dual Station Depth Speed Requirement
Welcome to the Raymarine Forum Eggbert,

It is certainly possible configure a second i40 Bidata to repeat Depth and Speed data from an i40 Bidata which has been interfaced to a compatible transducer. Please note that transom mounted depth transducers should not be used on vessels having inboard propulsion. Should the vessel feature inboard propulsion, then a thru-hull transducer(s) would need to be installed. If using a transom mounted transducer, the correct part number for the transducer is E26028-pz.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Dual Station Depth Speed Requirement - Chuck - Raymarine - Moderator - 08-24-16 02:53 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication