Raymarine forum / Raymarine Forums / Instruments v / DST800 with iTC-5 and e7D no speed

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DST800 with iTC-5 and e7D no speed
08-25-16, 08:52 AM
Post: #15
george123 Offline
Member
***
 		Posts: 81
Joined: Feb 2016
Reputation: 0
RE: DST800 with iTC-5 and e7D no speed
If you do not have the i70 /i70s in a system with the e7 and the itc would a system that has the depth, speed, and wind transducer installed still give you correct data?
I understand you will not be able to calibrate the devices or set alarms.
Without the itc do you get erratic transducer data on the e7.
Is it a correct statement to say, if you plan to use the itc device you must have the i70/i70s in the system as well.

Thanks
George
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: DST800 with iTC-5 and e7D no speed - george123 - 08-25-16 08:52 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication