European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
St4000 - wiring and voltage drop
|
|
08-31-16, 11:19 PM
(This post was last modified: 09-01-16 07:37 AM by Chuck - Raymarine - Moderator.)
Post: #7
|
|||
|
|||
|
RE: St4000 - wiring and voltage drop
Hmmm.. ok.. its 3 feet from another compass (main ritchie) its 4+ from the GPS, its about 4 feet from the alternator - maybe 3+ from the closest point of the engine block. - the excessive wire the compass comes with.. I only need about 4 feet.. could that be an issue?
There are two compasses on the boat other than the flux.. they are about 5ft apart and are within 5deg of each other with no adjustments required. Ive held a handheld compass beside the fluxgate and get the same reading at the compass 4ft about it? SO should I worry about this deveation? James |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
St4000 - wiring and voltage drop - Bikerbob - 08-29-16, 12:40 PM
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 08-29-16, 02:42 PM
RE: St4000 - wiring and voltage drop - Bikerbob - 08-29-16, 04:27 PM
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 08-30-16, 08:08 AM
RE: St4000 - wiring and voltage drop - Bikerbob - 08-30-16, 05:30 PM
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 08-31-16, 10:22 AM
RE: St4000 - wiring and voltage drop - Bikerbob - 08-31-16 11:19 PM
RE: St4000 - wiring and voltage drop - Chuck - Raymarine - Moderator - 09-01-16, 07:51 AM
|
User(s) browsing this thread: 2 Guest(s)