DCS interface to MFD

[Chuck - Raymarine - Moderator]

Viet,

There are neither any configuration settings which need be made within the VHF radio (except for entry of MMSI and phone book MMSIs) nor MFD (except for the port's BAUD rate (i.e. NMEA 4800)) to support transmission of DSC position report by the VHF radio and reception/response to DSC/DSE messages by the MFD. In this case, it is recommended that you ensure that the Ray240 has been updated with v2.29 software and GPM400 has been updated with the latest software to address the possibility that the fault may be rooted in old product software. Any future testing should verify that DSC/DSE sentences are being transmitted by the Ray240.