iTC-5

[Cosmos65]

Just to be clear on my system I will describe it for you.
My system starts with an EV-1 attached to a 5m backbone via a .5m spur and T with terminator. At the other end of the backbone connects to a 5 way connector, the first white port connects to an i70 with a 1m spur and an ACU100 is daisy chained to this MFD with a 1m spur. The ACU is powered directly to 12vdc source.
The second white port is connected to a 12vdc source and the third is connected to a p70 by a 1m spur and the open port of the p70 is terminated with a black terminator.
A second 5m backbone continues on to the iTC-5, the remaining backbone connector on the iTC-5 is terminated with a blue terminator and the white port has a .5m spur connected to an a77 wi-fi plotter which has its own power supply. As described in my earlier post the two transducers are connected to the iTC-5 with the drain wire on the depth terminal. This a all new system purchase in January all other I trumpets have been removed.

Thanks
John.