Added a DSM30 Sounder

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum mlucitt,

As equipment of this vintage did not support more than one source of any specific type of data (ex. GPS, depth, wind, etc.), it would be necessary to either
- disconnect the ST60+ Depth from the SeaTalk bus or
- disconnect the depth transducer from the ST60+ Depth instrument to permit the instrument to repeat depth data from the fishfinder product.

Note: Instrument depth transducer which have been directly mated to any of the following instruments/pods are designed to transmit at 200 kHz:
- i50 Depth/Tridata
- i40 Depth/Bidata
- iTC-5
- ST70/ST290 Depth Pod
- ST60/ST60+ Depth/Tridata
-ST40 Depth/Bidata
- ST50/ST50+ Depth/Tridata

As many fishfinders support transmitting at 200 kHz, should the fishfinder also be configured to transmit at 200 kHz, then the fishfinder may interfere with the above listed instruments to determine depth.