Raymarine forum / Raymarine Forums / Product Selection Assistance v / Wind Vane

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wind Vane
03-09-16, 02:08 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Wind Vane
Welcome to the Raymarine Forum olegreg,

It is not possible to interface an analog wind transducer directly to a SeaTalkng/NMEA 2000 backbone. The analog wind vane referenced would need to be interfaced to an iTC-5 Analog Instrument Transducer Converter and the SeaTalkng backbone would additionally need to include an i70 Multifunction Instrument Display (MFID) to calibrate the wind transducer. Raymarine does not offer any SeaTalkng/NMEA 2000 wind transducers nor are its products designed to calibrate third party NMEA 2000 transducers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Wind Vane - olegreg - 03-09-16, 01:19 PM
RE: Wind Vane - Chuck - Raymarine - Moderator - 03-09-16 02:08 PM
RE: Wind Vane - olegreg - 03-09-16, 02:16 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication