Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Installing evo400 on a steel hull sailboat

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Installing evo400 on a steel hull sailboat
10-10-16, 10:21 AM (This post was last modified: 08-16-18 10:14 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Installing evo400 on a steel hull sailboat
Welcome to the Raymarine Forum George,

As Raymarine autopilots feature magnetic north seeking sensors, it may be necessary to install an Evolution autopilot's EV-1 Sensor Core above decks should the sensed deviation below decks be excessive. It is not uncommon for such sensors to be mounted above decks to the aluminum mast of sailboats such as yours.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Installing evo400 on a steel hull sailboat - Chuck - Raymarine - Moderator - 10-10-16 10:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication