The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / e97 card reader problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
e97 card reader problem
10-13-16, 01:23 PM
Post: #1
Bajanfisherman Offline
Junior Member
**
 		Posts: 7
Joined: Oct 2016
Reputation: 0
e97 card reader problem
I have a e97 S/N:1150040 which was installed in January 2016.
Everything worked fine until July when the unit started to reboot intermittently. This got worse within a few weeks and I started to check all connections. Everything was fine, voltages stable at 12.89V.
By chance I removed the Navionics chart and everything went back to working fine (but no chart). I replaced the chart and thought I had solved the issue. Two days ago (10/11) I went out on the boat and the same issue reappeared. Again I removed the chart and we are back at square one. I tested the charts I removed in another unit and they will not work. Is there an easy fix to this or do I need to send in the unit?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
e97 card reader problem - Bajanfisherman - 10-13-16 01:23 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication