Tranducer identification

[Chuck - Raymarine - Moderator]

Neal,

As indicated within the FAQ found here, the transducer model name (ex. B260, B744V, P66, P79, etc.) identifies a family of transducers rather than a single transducer. Each variant of a transducer model (ex. B44V) has a design which is unique and based upon the make and model of fishfinder or instrument that the variant was designed to be mated to. As such, the transducer's product ID should be used in determining compatibility of the transducer with Raymarine's products. As indicated previously, the transducer identification tag would have been affixed to the plug end of the transducer's cable. Should you find the tag and attach a photo of the tag clearly showing all information printed onto the tag or perhaps attach a photo of the face of the plug, then it may be possible to identify the products that it may have been designed for use with.