CHANGE C120W TO ES127
|
10-24-16, 01:27 PM
Post: #2
|
|||
|
|||
RE: CHANGE C120W TO ES127
Welcome to the Raymarine Forum Progecon,
While the diagram which you have created is functionally correct, please note that communications between an a/c/e/eS/gS-Series MFD and C-Series Widescreen MFD will be limited to GPS data, instrument data, navigational, autopilot controls, alarms, and system state data. Cartography, radar imagery, weather imagery, fishfinder imagery, IP camera imagery, and waypoint/route/track data are not capable of being shared between an a/c/e/eS/gS-Series MFD and a C-Series Widescreen MFD. Should complete sharing of data be required within a dual station installation, then both C-Series Widescreen MFDs would need to be replaced. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
CHANGE C120W TO ES127 - PROGECON - 10-23-16, 04:59 PM
RE: CHANGE C120W TO ES127 - Chuck - Raymarine - Moderator - 10-24-16 01:27 PM
RE: CHANGE C120W TO ES127 - PROGECON - 10-25-16, 05:41 AM
RE: CHANGE C120W TO ES127 - Chuck - Raymarine - Moderator - 10-25-16, 08:18 AM
RE: CHANGE C120W TO ES127 - PROGECON - 10-25-16, 08:30 PM
RE: CHANGE C120W TO ES127 - Chuck - Raymarine - Moderator - 10-26-16, 09:06 AM
RE: CHANGE C120W TO ES127 - PROGECON - 10-26-16, 12:44 PM
RE: CHANGE C120W TO ES127 - Chuck - Raymarine - Moderator - 10-26-16, 01:18 PM
RE: CHANGE C120W TO ES127 - PROGECON - 11-02-16, 07:37 AM
RE: CHANGE C120W TO ES127 - Chuck - Raymarine - Moderator - 11-03-16, 09:21 AM
RE: CHANGE C120W TO ES127 - PROGECON - 12-19-16, 05:48 AM
RE: CHANGE C120W TO ES127 - Chuck - Raymarine - Moderator - 12-19-16, 09:04 AM
|
User(s) browsing this thread: 1 Guest(s)