The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How a Dragonfly display be interfaced to my VHF radio
10-25-16, 10:01 AM (This post was last modified: 01-10-17 03:59 PM by Chuck - Raymarine - Moderator.)
Post: #1
How a Dragonfly display be interfaced to my VHF radio
How a Dragonfly display be interfaced to my VHF radio

Unlike Raymarine's MFDs, Dragonfly displays do not feature communications interfaces. Accordingly, it would not be possible to interface a Dragonfly display to another marine electronics product (ex. VHF radio, etc.). Those seeking to have Dragonfly's embedded CHIRP (conical) sonar / DownVision sonar and chartplotting capability in a product which additionally features communications interfaces would be advised to consider an ax8 a-Series MFD or an eSx8 eS-Series MFD.

Those seeking to add a GPS sensor (ex. Raystar 130 GPS Sensor, etc.) to a vessel to support providing GPS data to a DSC VHF radio would be advised to seek a GPS sensor having communications interface matching that of the VHF radio to simplify interfacing the products to one another. Please click here to view a FAQ addressing how a Raystar 130 GPS Sensor or an a-Series MFD lacking a NMEA 0183 communications interface may in turn be interfaced to a DSC VHF radio requiring GPS data from a source supporting 4800 BAUD NMEA 0183 communications.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
How a Dragonfly display be interfaced to my VHF radio - Chuck - Raymarine - Moderator - 10-25-16 10:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)