Raymarine Transducer compatibility

[Chuck - Raymarine - Moderator]

Sergio,

Q) If I buy a multifunction display I must connect the transducer in DSM300 already installed or connect the transducer directly in MFD?
A) Please note that 50/200kHz fishfinder transducers cannot be mated to an ax8 or eSx8 MFD's Transducer socket. You have a choice of either:
- adapting the A80171 version of the P319 fishfinder transducer transducer to permit it to be interfaced to the DSM300 and then interfacing the DSM300's SeaTalkHS socket to any model of a/c/e/eS/gS-Series MFD's Network (RayNet) socket via a cable assembly constructed from an A80272 SeaTalkHS (M) to RayNet (M) Adapter and an appropriate length of RayNet (F) to RayNet (F) Cable; or
- connecting the A80171 version of the P319 fishfinder transducer directly to the Transducer socket of an ax7, c7x, e7D, ex7, or eSx7 MFD.