ST2000 and TackTick NMEA 0183 Problem

[nssailor]

Hi Chuck,

Thanks for the reply. Just getting time, now that the boat is out of the water, to revisit this issue. Just to clarify ... both the output from the TackTick NMEA box and the output from the third party chartplotter would be interfaced to (eg) the Raymarine NMEA 0183 multiplexer? The output from the multiplexer would then be directed to the ST2000 input port?
The problem is that I don't believe the third party chartplotter passes the Wind sentence through, so without the TackTick NMEA feed, the multiplexer (and hence the autopilot) wouldn't get the Wind data ...

Is that the configuration you're suggesting?

Thanks,

Colin