Raymarine forum / Raymarine Forums / Autopilots v / Evolution Autopilot unable to hold course in waves

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Evolution Autopilot unable to hold course in waves
11-09-16, 01:22 PM (This post was last modified: 11-10-16 08:40 AM by Chuck - Raymarine - Moderator.)
Post: #15
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Evolution Autopilot unable to hold course in waves
Willy,

The p70/p70R v3.07 software update has been available since August. Please additionally note that access to the Rudder Damping configuration setting will be blocked if the calibration settings have been locked. The Calibration Lock feature is commonly configured to ON after the autopilot has completed the Dockside Wizard and has completed to cruise to determine the vessel's deviation table and handling characteristics. The Calibration Lock can be toggled ON/OFF via the command sequence MENU->SET-UP->AUTOPILOT CALIBRATION->VESSEL SETTINGS->CALIBRATION LOCK.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Evolution Autopilot unable to hold course in waves - Chuck - Raymarine - Moderator - 11-09-16 01:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication