ST 5000 updrade to EV 100 T70154
|
03-11-16, 09:24 AM
(This post was last modified: 03-11-16 09:25 AM by Steve - Raymarine - Moderator.)
Post: #8
|
|||
|
|||
RE: ST 5000 updrade to EV 100 T70154
The HC5345 has a RAM capacity of 8.34 Cu/In, which is on the high end of the EV-100 system. Being on the high end of capacity, I always recommend going to the next higher capacity system because of operating the autopilot in heavy seas and longer life. This autopilot would be the Type 1 hydraulic, EV-200. You have supplied the ST5000+ control unit information but nothing on the drive used in the system. I am assuming it is a Type 1 pump, M81120/M81190, please advise.
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
ST 5000 updrade to EV 100 T70154 - BlackH2oDog - 03-10-16, 08:08 AM
RE: ST 5000 updrade to EV 100 T70154 - Steve - Raymarine - Moderator - 03-10-16, 09:32 AM
RE: ST 5000 updrade to EV 100 T70154 - BlackH2oDog - 03-10-16, 11:25 AM
RE: ST 5000 updrade to EV 100 T70154 - Steve - Raymarine - Moderator - 03-10-16, 11:34 AM
RE: ST 5000 updrade to EV 100 T70154 - BlackH2oDog - 03-10-16, 11:46 AM
RE: ST 5000 updrade to EV 100 T70154 - Steve - Raymarine - Moderator - 03-10-16, 04:36 PM
RE: ST 5000 updrade to EV 100 T70154 - BlackH2oDog - 03-11-16, 07:44 AM
RE: ST 5000 updrade to EV 100 T70154 - Steve - Raymarine - Moderator - 03-11-16 09:24 AM
RE: ST 5000 updrade to EV 100 T70154 - BlackH2oDog - 03-14-16, 06:37 AM
RE: ST 5000 updrade to EV 100 T70154 - Steve - Raymarine - Moderator - 03-14-16, 09:34 AM
|
User(s) browsing this thread: 4 Guest(s)