The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product Selection Assistance v / Upgrades to Existing Raymarine System on B35.5

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrades to Existing Raymarine System on B35.5
11-16-16, 12:15 PM
Post: #1
Tnauck Offline
Junior Member
**
 		Posts: 15
Joined: Mar 2016
Reputation: 0
Upgrades to Existing Raymarine System on B35.5
I just bought a Bristol 35.5 with the following instrumentation: i50 Speed, i50 Depth, i60 Wind, p70 Autopilot Controller and SPX-5 Course Computer. The instruments are connected to one SeaTalkNG network using a 5 point connector and the Autopilot and Course Computer to a second SeaTalkNG network using another 5 point connector. I would like to connect the two networks and add an a75 MFD with WiFi to complete the network. Are there any potential compatibility problems with this plan? I plan to disconnect the power to one network, connect the two 5 point connectors with a backbone cable and use a T piece with spur cable and terminator to connect the MFD to the system. Do you see any complications with this plan? Thanks for your help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrades to Existing Raymarine System on B35.5 - Tnauck - 11-16-16 12:15 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication