The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / Legacy RADAR

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Legacy RADAR
11-25-16, 05:26 PM
Post: #1
jimhumphries Offline
Junior Member
**
 		Posts: 2
Joined: Oct 2016
Reputation: 0
Legacy RADAR
MY apologies in advance if this is has been covered elsewhere in this forum.

I am trying to pair up scanners and displays from three legacy Raytheon RADARs but I'm having a heck of a time finding out what might work with what. I have a 1200 scanner unit with no display, I have a working RL9 display (M92558) and an untested RL9 scanner (M92559 - no cable) and I have an untested R10 scanner unit and cable with a JRC CNM-128H-7PCRD-1007B printed circuit card (the model # tag is unreadable) and a working R10X display (Type 50003).

I am most interested in getting the RL9 paired up and working but my scanner model - M92559 - doesn't agree with the Pathfinder call-out of M92557 on my M92558 display unit. I have lots of equipment and experience with electronics so modifications shouldn't be a problem.

Can I get any of this to work?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Legacy RADAR - jimhumphries - 11-25-16 05:26 PM
RE: Legacy RADAR - jimhumphries - 12-10-16, 04:02 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication