European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Fishfinders 
/
a/c/e/eS/gS-Series MFD with CHIRP/DownVision Transducer vs. CPT-S Transducer
/
a/c/e/eS/gS-Series MFD with CHIRP/DownVision Transducer vs. CPT-S Transducer
|
a/c/e/eS/gS-Series MFD with CHIRP/DownVision Transducer vs. CPT-S Transducer
|
|
12-14-16, 02:19 PM
(This post was last modified: 12-08-17 08:17 AM by Derek - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
a/c/e/eS/gS-Series MFD with CHIRP/DownVision Transducer vs. CPT-S Transducer
a/c/e/eS/gS-Series MFD with CHIRP/DownVision Transducer vs. CPT-S Transducer
Should a compatible CHIRP/DownVision transducer (i.e. CPT-100, CPT-110, CPT-120) be interfaced to an ax8 MFD, eSx8 MFD, or any model of a/c/e/eS/gS-Series MFD which has been interfaced to a CP100 CHIRP/DownVision Fishfinder Sonar Module, then the MFD will support both CHIRP (conical) sonar imaging and DownVision sonar imaging. The upper portion of the screen snapshot below is a CHIRP (conical) Fishfinder Sonar image and the lower portion of the screen snapshot below is a DownVision Fishfinder Sonar image. However, should a CPT-S transducer be interfaced to an ax8 MFD, eSx8 MFD, or any model of a/c/e/eS/gS-Series MFD which has been interfaced to a CP100 CHIRP/DownVision Fishfinder Sonar Module, then the MFD will support only CHIRP (conical) sonar imaging (see the upper portion of the screen snapshot above). RAYFAQ# |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
a/c/e/eS/gS-Series MFD with CHIRP/DownVision Transducer vs. CPT-S Transducer - Chuck - Raymarine - Moderator - 12-14-16 02:19 PM
|
User(s) browsing this thread: 2 Guest(s)