Raymarine forum / Raymarine Forums / General Discussions v / Yamaha to Raymarine Connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yamaha to Raymarine Connection
12-15-16, 11:16 AM (This post was last modified: 12-15-16 11:19 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Yamaha to Raymarine Connection
Welcome to the Raymarine Forum ultimatepursuit,

It appears that you have been advised incorrectly. Please note that the ECI-100 Engine Gateway is not designed to be interface to the Yamaha gauge. Instead, it is designed to be interfaced to the Yamaha Command-Link or Command-Link Plus Hub to which the Yamaha gauges are interfaced. Accordingly, it is recommended that the Raymarine Yamaha Link Cable (E70242) be purchased to connect the ECI-100 to an unused spur socket within one of your engine system's Yamaha Command-Link or Command-Link Plus Hubs.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Yamaha to Raymarine Connection - Chuck - Raymarine - Moderator - 12-15-16 11:16 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication