CP370 with M260 Loss of Bottom and Depth

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

CP370 with M260 Loss of Bottom and Depth

12-19-16, 04:20 PM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: CP370 with M260 Loss of Bottom and Depth

Welcome to the Raymarine Forum baja [censored],

1) Had the M260 been successfully used with a DSM300 prior to installation of the CP370?

2) Does the problem occur when the system is operated in AUTO frequency?

3) What is the hull thickness and composition in the location where the transducer was installed?

4) If the customer commands the Ping Enable feature to OFF and then ON again, does the system find the bottom?

« Next Oldest | Next Newest »

Messages In This Thread

CP370 with M260 Loss of Bottom and Depth - baja bum - 12-17-16, 01:21 PM

RE: CP370 with M260 Loss of Bottom and Depth - Chuck - Raymarine - Moderator - 12-19-16 04:20 PM

RE: CP370 with M260 Loss of Bottom and Depth - baja bum - 12-22-16, 05:59 AM

RE: CP370 with M260 Loss of Bottom and Depth - Chuck - Raymarine - Moderator - 12-22-16, 10:58 AM

User(s) browsing this thread: 1 Guest(s)