The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / AIS shuts down when you use GO TO

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AIS shuts down when you use GO TO
12-23-16, 11:50 AM
Post: #1
gkastendike Offline
Junior Member
**
 		Posts: 7
Joined: Feb 2016
Reputation: 0
AIS shuts down when you use GO TO
Equipment I have
E127 MFD
E125 MFD
Ray 100 autopilot
Ray RD424 HD 4kw open raydome
Ray cp100 down vision Module
EV-200 Pilot
Ray I70 display
Ray 130 GPS
EM B100 Class B AIS transponder
S100 antenna Splitter
Navionics Charts
Standard VHF

All equipment above has the Upgraded software that were offered as of November 1, 2016 including the communication ports.

My Issue: When you use the "Go To" function the AIS and the signal that transmits the lat /long to the Vhf shuts down. Meaning no AIS targets are shown on either MFD and the VHF shows no data for lat/long. Your techs at the Annapolis Boat show made sure all the software upgrades were current when I called them from the boat.

All systems work as they should when you Stop "GO TO"or Stop using Follow Route.

Can you help?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
AIS shuts down when you use GO TO - gkastendike - 12-23-16 11:50 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication