Fluxgate M81190 connection to S1 computer
|
03-14-16, 02:32 PM
Post: #4
|
|||
|
|||
RE: Fluxgate M81190 connection to S1 computer
(03-11-16 09:52 AM)Steve - Raymarine - Moderator Wrote: I don't recognize the white connector pictured, the S1 course computer has single wire terminal strip connections. The M81190 fluxgate compass has a five wire connection to the S1 course computer. One if the wires is a shield wire (Bare) that might have been cut back into the jacket if the cable was shorten. The wires colors are Red, Green, Yellow, Blue and Shield (Bare). Thanks Steve. I don't have the previous fluxgate, but perhaps it was not Raymarine. Anyhow, going with the 5 wire colors on my M81190, where do they connect to on the S1? I know there is a section dedicated to the fluxgate. Are they labeled to match those colors?? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Fluxgate M81190 connection to S1 computer - Capt Jack - 03-11-16, 08:21 AM
RE: Fluxgate M81190 connection to S1 computer - Steve - Raymarine - Moderator - 03-11-16, 09:52 AM
RE: Fluxgate M81190 connection to S1 computer - Capt Jack - 03-14-16, 02:29 PM
RE: Fluxgate M81190 connection to S1 computer - Capt Jack - 03-14-16 02:32 PM
RE: Fluxgate M81190 connection to S1 computer - Steve - Raymarine - Moderator - 03-15-16, 08:27 AM
|
User(s) browsing this thread: 1 Guest(s)