Help with compatibility upgrading my equipment

[Chuck - Raymarine - Moderator]

Q1: Is it possible to connect my legacy transducer straight into the a95?
A1: No.

Q2: Will I need adaptor cables, or only a itc5 will do the trick?
A2: Should you desire to interface the currently installed instrument depth transducer to your new system, then it may interfaced to the system via any one of the following methods:
- interface the depth transducer to an i40 Depth instrument which in turn has been interfaced to the SeaTalk socket of a SeaTalk to SeaTalkng Converter which has been installed as part of the system's powered and properly terminated SeaTalkng backbone to which the MFD has been interfaced as a spur.
- interface the depth transducer to an i50 Depth instrument which in turn has been interfaced a spur to a powered and properly terminated SeaTalkng backbone to which the MFD has been interfaced as a spur.
- interface the depth transducer an iTC-5 which has been installed as a backbone component within the system's powered and properly terminated SeaTalkng backbone to which an i70S MFID (required for calibration of transducers which have been interfaced to an iTC-5) and the MFD have been interfaced as a spurs.