Raymarine forum / Raymarine Forums / Instruments v / wind transducer setup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
wind transducer setup
01-09-17, 04:06 PM (This post was last modified: 01-09-17 04:27 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: wind transducer setup
Welcome to the Raymarine Forum Charlie,

Please confirm that you are using a Wind Pod vs an iTC-5 Analog Instrument Transducer Converter. Please additionally confirm the you have initiated Transducer Setup via the i70 MFID rather than the a78 MFD. If so, then it is recommended that you check the software level of your products to verify that the i70 MFID and Wind Pod have each been updated with the latest available Raymarine product software updates. If so and the problem persists, then please identify any other marine electronics devices which have been installed as part of this system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
wind transducer setup - charlie98117 - 01-09-17, 01:47 PM
RE: wind transducer setup - Chuck - Raymarine - Moderator - 01-09-17 04:06 PM
wind transducer setup - Marcmmm - 12-04-17, 10:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication