Raynet cables
|
01-10-17, 12:37 PM
(This post was last modified: 01-11-17 11:57 AM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: Raynet cables
Thank you for the reply. Unfortunately, when I try to attach even a single photo I get an error message from Raymarine noting that the photo has exceeded the allowed size. This is odd, since it is only a single digital photo. Any suggestions?
I think you are correct about the packaging guidelines. Interestingly, the 5m Raynet cables are a slightly smaller diameter than the 10m cables, and the kinks in the 5m cables are worse than those in the 10m cables. I don't know if this means that the individual wires inside the 5m cables are a smaller gauge than the wires inside a 10m cables, but if this is the case the kinks are more of a concern in the 5m cables. I initially ordered one cable of each length, but perhaps I should use two of the 10m cables (although there would be additional expense and needless coiling of excess cable in that case). Bob S |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Raynet cables - BosSH - 12-27-16, 10:12 PM
RE: Raynet cables - Chuck - Raymarine - Moderator - 12-28-16, 09:46 AM
RE: Raynet cables - Istream - 01-10-17, 10:42 AM
RE: Raynet cables - Chuck - Raymarine - Moderator - 01-10-17, 11:04 AM
RE: Raynet cables - BosSH - 01-10-17 12:37 PM
RE: Raynet cables - Istream - 01-10-17, 01:45 PM
RE: Raynet cables - Chuck - Raymarine - Moderator - 01-11-17, 11:56 AM
RE: Raynet cables - BosSH - 01-11-17, 06:48 PM
RE: Raynet cables - BosSH - 01-11-17, 07:44 PM
RE: Raynet cables - Istream - 01-12-17, 10:33 PM
RE: Raynet cables - Chuck - Raymarine - Moderator - 01-13-17, 09:45 AM
|
User(s) browsing this thread: 2 Guest(s)