Autopilot to mfd

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum anovey,

It is recommended the unoccupied spur sockets of any Raymarine products or SeaTalkng networking components be protected with an A06032 SeaTalkng blanking plug to protect the socket from exposure to the marine environment. Regarding the MFD not communicating with the autopilot, it is recommended that you verify that the MFD which has been interfaced as a spur to the SeaTalkng backbone has been designated as the system's Data Master MFD (HOME->SET-UP->MAINTENANCE->DATA MASTER) and that this MFD is powered ON when attempting to use the autopilot. If so, then please attach the Diagnostics_Data_...html file for this system to your response to this post.