The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rudder Position Sensor - M81105
01-17-17, 09:30 PM
Post: #1
Rudder Position Sensor - M81105
In my attempts to gather information to assist me in installing my new M81105 on my sailboat, I came across this link:

http://raymarine.ning.com/forum/topics/r...sor-m81105

I appreciate that this forum is now longer active; however, the information that it contains is germane to my project. The dilemma I have pertains to the maximum angle that the Rudder Position Sensor can physically rotate. From the link, it seems, at least for this gentleman's application (EV-100), the maximum is 30° in each direction or a total of 60°.

On the instruction sheet that accompanied my sensor it shows the "Maximum permitted travel +/-60°". I take this as +/-60° from center or a total of 120° stop to stop. My rudder quadrant rotates approximately 90° from stop to stop. Please confirm that the Rudder Position Sensor can rotate greater than the 90° needed by the quadrant?

I will be electrically interfacing the M81105 to a SPX-5 Course Computer.

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Rudder Position Sensor - M81105 - Hello Below - 01-17-17 09:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)