wind transducer setup

[Chuck - Raymarine - Moderator]

Charlie,

The symptom reported may be rooted in any of the following should the wind speed be reported as 0.0 when the wind cups are rotated:
- not having the correct source configured for Wind (MENU->SET-UP> SYSTEM SET-UP->DATA SOURCES->WIND) ... ensure that the wind pod has been selected
- the wind transducer has not been correctly interfaced to the wind pod ... verify that the transducer cable's leads have been mated to the matching color coded terminals of the wind pod
- there is a problem with the wind transducer or the masthead cable ... click here to view a FAQ addressing how to test the transducer. Transducer's and masthead cable assemblies failing the test should be returned to Raymarine’s Product Repair Center to be bench checked / serviced.
- there is a fault with the wind pod ... should all of the above listed items have been satisfied, then the wind pod should be returned to Raymarine’s Product Repair Center to be bench checked / serviced.