Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA position data from Course computer S1G
01-24-17, 04:11 PM (This post was last modified: 01-24-17 04:42 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: NMEA position data from Course computer S1G
Peter,

Regarding the S1G, while it is generally frowned upon to use an autopilot's NMEA 0183 output port to supply GPS data to a VHF radio, SSB, etc., it is not uncommon for owners of the S1/S1G/S2/S2G/S3/S3G autopilot course computers to do so. This practice should undertaken with later model of autopilot course computers, as they have significantly less data bridging capability.

Regarding the Raystar 120 GPS Sensor, it was produced in SeaTalk and NMEA 0183 versions, identified by the information printed on the vinyl medallion affixed to the upper shell of the GPS sensor. Which version of the Raystar 120 GPS Sensor do you own?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
NMEA position data from Course computer S1G - Petersailor - 01-24-17, 03:33 PM
RE: NMEA position data from Course computer S1G - Chuck - Raymarine - Moderator - 01-24-17 04:11 PM
RE: NMEA position data from Course computer S1G - Petersailor - 01-24-17, 04:26 PM
RE: NMEA position data from Course computer S1G - Petersailor - 01-24-17, 05:05 PM
RE: NMEA position data from Course computer S1G - Petersailor - 01-26-17, 01:22 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)