Rudder Alignment Test - Dockside Wizard

[[email protected]]

I just want to close out this thread (to benefit future readers). The suggestion to rotate the rudder sensor was spot on! THAT WAS EASY ... I centered the wheel / rudder; I disconnected the connector cup / threaded rod from the rudder sensor arm to the quadrant; with the P70 and ACU powered-on, I moved the sensor arm until the P70 read the rudder was centered. This told me what direction and how much to rotate the sensor. Loosened up the 3 screws on the sensor mount, made the adjustment, tightened down and reconnected the cup / threaded rod from the arm to the quadrant. Now the wheel / rudder is physically centered and the P70 is reading centered with zero degrees of variance. Ran the dockside wizard and all is well. Looks like everything works fine.