European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
Calibrating the autopilot
|
|
01-30-17, 10:44 AM
(This post was last modified: 01-30-17 11:13 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
|
RE: Calibrating the autopilot
Hi Chuck,
Thank you for your answer. I do have a "speed through water sensor" (Raymarine D800) which is properly installed (connected through an ITC5 to the STNg network) and working fine. The ITC5 has the latest sofware update available, and the same for all the other instruments (i70, p70, ES7, EV100). I also have another speed/depth sensor installed directly to an old Raymarine bidata 60 but not to the autopilot nor to the STng, which gives only a 0.3 knots difference with the D800, so I assume that the speed data received by the autopilot from the D800 via the STng net is correct. Which is the part number for a wheel drive EV100 autopilot rudder sensor? Best Regards |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Calibrating the autopilot - ferssini - 01-25-17, 10:47 AM
RE: Calibrating the autopilot - Chuck - Raymarine - Moderator - 01-25-17, 04:43 PM
RE: Calibrating the autopilot - ferssini - 01-30-17 10:44 AM
RE: Calibrating the autopilot - Chuck - Raymarine - Moderator - 01-30-17, 11:20 AM
RE: Calibrating the autopilot - ferssini - 01-31-17, 10:06 AM
RE: Calibrating the autopilot - Chuck - Raymarine - Moderator - 01-31-17, 12:18 PM
RE: Calibrating the autopilot - Chuck - Raymarine - Moderator - 02-24-17, 09:40 AM
|
User(s) browsing this thread: 1 Guest(s)