How to troubleshoot SR100 connection to E80

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum metrxguy,

It is recommended that you verify that the has been updated with the the [url=http://www.raymarine.com/view/?id=3753]latest E-Series Classic MFD software update, and if not, then update its software accordingly. Following the software update, you will need to either add a Weather application page iocon to the MFD's Custom page set or edit one of the preconfigured page sets to replace one of the page set's pages/panes with a Weather application page.

The SR100's STATUS LED will flash amber when not communicating with the MFD. The sR100's STATUS LED will flash green when communicating with the MFD. No subscription is required for the SR100's STATUS LED to perform as has been specified here. Should you be uncertain regarding whether the SR100 is being powered, then it would be recommended that is power cable be unplugged and that voltage then be measured at its plug. Voltage testing may also be used to determine which of the vessel's circuits is responsible for powering the SR100.