Raymarine forum / Raymarine Forums / Instruments v / wind transducer setup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
wind transducer setup
02-06-17, 04:26 PM
Post: #11
charlie98117 Offline
Junior Member
**
 		Posts: 17
Joined: May 2016
Reputation: 0
RE: wind transducer setup
Hi Chuck: Thanks for the input. I drew that part of the diagram from memory, I recall putting a T connector in there but not positive exactly what is plugged into the spur connection. I have to go to the boat tomorrow so I will open up the Navpod to verify connections. Are you saying neither the i70, P70 or a78 should be on a spur? Or is it just the a78 cannot be on a spur? In any case I will daisy chain them together as you suggest.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
wind transducer setup - charlie98117 - 01-09-17, 01:47 PM
RE: wind transducer setup - charlie98117 - 02-06-17 04:26 PM
wind transducer setup - Marcmmm - 12-04-17, 10:56 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication