Autorouting safe Depth cant be changed?

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum brunopsalles,

Please verify that your MFD has been updated with the latest available Raymarine product software updates. If so, then please note that the constraints for autorouting are not configured within the MFD's Chart application. Instead, the Min. Safe Depth, Min. Safe Beam, and Min. Safe Height constraints are set within the MFD's Boat Details menu (HOME->CUSTOMIZE->BOAT DETAILS). These values should not change from the values entered within this menu. Should your MFD not be retaining these values, then there may be an issue with your MFD's memory and it would accordingly be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced.