Raymarine forum / Raymarine Forums / Autopilots v / x30 and ST6002

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
x30 and ST6002
02-09-17, 10:57 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: x30 and ST6002
Ted,

I am seeking information concerning comparison of the Heading on the autopilot and COG on the chartplotting product ... not Heading on the chartplotting product ... again the vessel must be underway with the autopilot in Auto mode when making this comparison. Is there a SeaTalk to SeaTalkng Converter installed within the system? If so, what version of software is installed within it? What version of software is installed within the X30? How has the third party chartplotter been interfaced to the system? And finally, did this system perform properly in the past or are the reported symptoms a recent development?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
x30 and ST6002 - Ted - 02-08-17, 01:40 PM
RE: x30 and ST6002 - Ted - 02-08-17, 06:14 PM
RE: x30 and ST6002 - Chuck - Raymarine - Moderator - 02-09-17 10:57 AM
RE: x30 and ST6002 - Ted - 02-10-17, 10:43 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication