Raymarine forum / Raymarine Forums / Instruments v / ST60 tridata not sending data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST60 tridata not sending data
03-02-17, 10:26 AM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: ST60 tridata not sending data
SVNeko,

The immediate problem is that the SeaTalk to SeaTalkng Converter has old software installed within it. As the latest a/c/e/eS/gS-Series MFD software update included software update files to update the software within most Raymarine devices which had been interfaced to the system via SeaTalkng / NMEA 2000 communications protocol or Ethernet communications protocol, it is recommended that the latest a/c/e/eS/gS-Series MFD software be downloaded from Raymarine's website and that the software within your MFD, SeaTalk to SeaTalkng Converter, and any other supported Raymarine devices which have been interfaced to the system via SeaTalkng / NMEA 2000 communications protocol or Ethernet communications protocol be updated with the latest Raymarine product software. After doing so, Data Source selection should be supported.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST60 tridata not sending data - SVNeko - 02-21-17, 08:41 AM
RE: ST60 tridata not sending data - Chuck - Raymarine - Moderator - 03-02-17 10:26 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication