Raymarine forum / Raymarine Forums / Fishfinders v / CP570 wont turn on

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP570 wont turn on
03-21-16, 12:39 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: CP570 wont turn on
Welcome to the Raymarine Forum flbluerunner,

Please note that Raymarine MFDs are not designed to supply power to external fishfinder sounder modules. Correspondingly, troubleshooting should begin with checking the CP570's Status LED to verify whether it is illuminated, signaling that the CP570 is powered. If not, then it is recommended that you verify that the power circuit which has been installed to supply power to the CP570 is energized by unplugging the CP570's power cable and then measuring the voltage at the cable's plug.

If the CP570's Status LED is illuminated and the problem persists, then please specify the color of the CP570's Status LED and flash code (see page 43 of the CP470/570 Installation Instructions).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
CP570 wont turn on - flbluerunner - 03-19-16, 07:54 PM
RE: CP570 wont turn on - Chuck - Raymarine - Moderator - 03-21-16 12:39 PM
RE: CP570 wont turn on - flbluerunner - 04-09-16, 02:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication