Losing bottom contact with RM e97

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Losing bottom contact with RM e97

03-14-17, 04:06 PM (This post was last modified: 03-16-17 12:42 PM by Dave - Raymarine - Moderator.)

Post: #1

Ub2m4

Junior Member

Posts: 8
Joined: Feb 2017
Reputation: 0

Losing bottom contact with RM e97

Since my last post I now realize how little I know. Had recharge do work on our boat. E97 chart plotter with a B60-12 transducer. Some our initial problem was software updates. Did not know we were 7.5 and now up to R17. On smoothe surface or light chop good bottom contact up to 35 mph. On mod cop bottom contact lost 15-20 mpg, but good below 15mph. He also said their was a transducer selection in the menu in the chart plotter. Not sure how to find it. He said could not find B60-12 and was told by tech support to pick any transducer as long as not P48.
How do I proceed? Boat bought used and no manuals or instructions Again thanks for your patience.

« Next Oldest | Next Newest »

Messages In This Thread

Losing bottom contact with RM e97 - Ub2m4 - 03-14-17 04:06 PM

RE: Loosing bottom contact with RM e97 - Dave - Raymarine - Moderator - 03-15-17, 08:08 AM

RE: Loosing bottom contact with RM e97 - Ub2m4 - 03-15-17, 03:33 PM

RE: Loosing bottom contact with RM e97 - Dave - Raymarine - Moderator - 03-16-17, 08:07 AM

RE: Loosing bottom contact with RM e97 - Ub2m4 - 03-16-17, 08:42 AM

RE: Losing bottom contact with RM e97 - Dave - Raymarine - Moderator - 03-16-17, 04:07 PM

RE: Losing bottom contact with RM e97 - Ub2m4 - 03-17-17, 01:55 PM

RE: Losing bottom contact with RM e97 - Chuck - Raymarine - Moderator - 03-20-17, 11:02 AM

RE: Losing bottom contact with RM e97 - Ub2m4 - 03-20-17, 01:56 PM

RE: Losing bottom contact with RM e97 - Chuck - Raymarine - Moderator - 03-20-17, 03:50 PM

User(s) browsing this thread: 2 Guest(s)